{"title":"All Products","description":"","products":[{"product_id":"ibc-bench-chisel-set-walnut-handle","title":"IBC Premium Bench Chisel Set","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 9.2\" with regular handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 3.87\"\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59613308649758,"sku":"CHSW-0800","price":720.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59613308682526,"sku":"CHSM-0800","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/Bench_set_Walnut-2.jpg?v=1736004878"},{"product_id":"1-4-inch-bench-chisel-walnut-handle","title":"1\/4 Inch IBC Premium Bench Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 9.2\" with regular handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 3.87\"\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59613307404574,"sku":"CHWA-0803","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59613307437342,"sku":"CHMA-0803","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59613307470110,"sku":"CHBF-0803","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHWA_0803.jpg?v=1736868585"},{"product_id":"3-8-inch-bench-chisel-walnut-handle","title":"3\/8 Inch IBC Premium Bench Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 9.2\" with regular handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 3.87\"\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59613307535646,"sku":"CHWA-0804","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59613307568414,"sku":"CHMA-0804","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59613307601182,"sku":"CHBF-0804","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHWA-0804.jpg?v=1736868620"},{"product_id":"1-2-inch-bench-chisel-walnut-handle","title":"1\/2 Inch IBC Premium Bench Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 9.2\" with regular handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 3.87\"\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59613244588318,"sku":"CHWA-0805","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59613244621086,"sku":"CHMA-0805","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59613244653854,"sku":"CHBF-0805","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHWA-0805.jpg?v=1736868667"},{"product_id":"5-8-inch-bench-chisel-walnut-handle","title":"5\/8 Inch IBC Premium Bench Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 9.2\" with regular handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 3.87\"\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59613307633950,"sku":"CHWA-0807","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59613307666718,"sku":"CHMA-0807","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59613307699486,"sku":"CHBF-0807","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHWA-0807.jpg?v=1736868700"},{"product_id":"1-inch-bench-chisel-walnut-handle","title":"1 Inch IBC Premium Bench Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 9.2\" with regular handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 3.87\"\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59613307863326,"sku":"CHWA-0809","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59613307896094,"sku":"CHMA-0809","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59613307928862,"sku":"CHBF-0809","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHWA-0809.jpg?v=1736868751"},{"product_id":"3-4-inch-bench-chisel-walnut-handle","title":"3\/4 Inch IBC Premium Bench Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 9.2\" with regular handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 3.87\"\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59613307765022,"sku":"CHWA-0808","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59613307797790,"sku":"CHMA-0808","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59613307830558,"sku":"CHBF-0808","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHWA-0808.jpg?v=1736868727"},{"product_id":"ibc-paring-chisel-set-walnut-handle","title":"IBC Premium Paring Chisel Set","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 12.25\" with long (paring) handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 7\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616136462622,"sku":"CSPW-0801","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616136495390,"sku":"CSPM-0801","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/paring_chisel_set_walnut.jpg?v=1736089434"},{"product_id":"5-8-inch-paring-chisel-walnut-handle","title":"5\/8 Inch IBC Premium Paring Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 12.25\" with long (paring) handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 7\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616136167710,"sku":"CHPW-0817","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616136200478,"sku":"CHPM-0817","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59616136233246,"sku":"CHBF-0817","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/paring_chisel_set_walnut.jpg?v=1736089434"},{"product_id":"3-8-inch-paring-chisel-walnut-handle","title":"3\/8 Inch IBC Premium Paring Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 12.25\" with long (paring) handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 7\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616135971102,"sku":"CHPW-0814","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616136003870,"sku":"CHPM-0814","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59616136036638,"sku":"CHBF-0814","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/paring_chisel_set_walnut.jpg?v=1736089434"},{"product_id":"3-4-inch-paring-chisel-walnut-handle","title":"3\/4 Inch IBC Premium Paring Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 12.25\" with long (paring) handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 7\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616136266014,"sku":"CHPW-0818","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616136298782,"sku":"CHPM-0818","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59616136331550,"sku":"CHBF-0818","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/paring_chisel_set_walnut.jpg?v=1736089434"},{"product_id":"1-4-inch-paring-chisel-walnut-handle","title":"1\/4 Inch IBC Premium Paring Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 12.25\" with long (paring) handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 7\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616135872798,"sku":"CHPW-0813","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616135905566,"sku":"CHPM-0813","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59616135938334,"sku":"CHBF-0813","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/paring_chisel_set_walnut.jpg?v=1736089434"},{"product_id":"1-2-inch-paring-chisel-walnut-handle","title":"1\/2 Inch IBC Premium Paring Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 12.25\" with long (paring) handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 7\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616136069406,"sku":"CHPW-0815","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616136102174,"sku":"CHPM-0815","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59616136134942,"sku":"CHBF-0815","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/paring_chisel_set_walnut.jpg?v=1736089434"},{"product_id":"1-inch-paring-chisel-walnut-handle","title":"1 Inch IBC Premium Paring Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 12.25\" with long (paring) handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 7\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616136364318,"sku":"CHPW-0819","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616136397086,"sku":"CHPM-0819","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59616136429854,"sku":"CHBF-0819","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/paring_chisel_set_walnut.jpg?v=1736089434"},{"product_id":"bench-plane-2-0-095-thk-1-5-8-wide","title":"IBC Premium Bench Plane #2 0.095\" thk 1 5\/8\" wide","description":"\u003cp\u003eUpgrade your vintage Stanley or Record bench plane with our precision-engineered IBC replacement blade. Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.095 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468723233054,"sku":"RBBE-0309","price":56.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/0309-0310-0311-0312-0313-1.jpg?v=1742567371"},{"product_id":"bench-plane-3-51-4-0-095-thk-1-3-4-wide","title":"IBC Premium Bench Plane #3, #5 1\/4 0.095\" thk 1 3\/4\" wide","description":"\u003cp\u003eUpgrade your vintage Stanley or Record bench plane with our precision-engineered IBC replacement blade. Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.095 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468723364126,"sku":"RBBE-0310","price":61.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/0309-0310-0311-0312-0313-1.jpg?v=1742567371"},{"product_id":"bench-plane-4-5-0-095-thk-2-wide","title":"IBC Premium Bench Plane #4, #5 0.095\" thk 2\" wide","description":"\u003cp\u003eUpgrade your vintage Stanley or Record bench plane with our precision-engineered IBC replacement blade. Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.095 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468723593502,"sku":"RBBE-0311","price":61.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/0309-0310-0311-0312-0313-1.jpg?v=1742567371"},{"product_id":"bench-plane-4-1-2-6-7-0-095-thk-2-3-8-wide","title":"IBC Premium Bench Plane #4 1\/2, #6, #7 0.095\" thk 2 3\/8\" wide","description":"\u003cp\u003eUpgrade your vintage Stanley or Record bench plane with our precision-engineered IBC replacement blade. Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.095 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468725592350,"sku":"RBBE-0312","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/0309-0310-0311-0312-0313-1.jpg?v=1742567371"},{"product_id":"bench-plane-8-0-095-thk-2-5-8-wide","title":"IBC Premium Bench Plane #8 0.095\" thk 2 5\/8\" wide","description":"\u003cp\u003eUpgrade your vintage Stanley or Record bench plane with our precision-engineered IBC replacement blade. Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.095 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468725985566,"sku":"RBBE-0313","price":72.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/0309-0310-0311-0312-0313-1.jpg?v=1742567371"},{"product_id":"bench-plane-blade-chip-breaker-matched-set-with-tab-for-no-3","title":"IBC Premium Bench Plane Blade \/ Chip Breaker Matched Set With Tab For No #3","description":"\u003cp\u003eUpgrade your vintage Stanley or Record bench plane with our precision-engineered IBC replacement blade. Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.095 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468726477086,"sku":"RBMS-0394","price":94.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/RBMS-0394-0395-0396-0397-tabbed-set_98b3ff40-5075-46d8-938c-427a9f3bc36e.jpg?v=1784294136"},{"product_id":"bench-plane-blade-chip-breaker-matched-set-with-tab-for-no-4-5","title":"IBC Premium Bench Plane Blade \/ Chip Breaker Matched Set With Tab For No #4, #5","description":"\u003cp\u003eUpgrade your vintage Stanley or Record bench plane with our precision-engineered IBC replacement blade. Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.095 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468726542622,"sku":"RBMS-0395","price":100.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/RBMS-0394-0395-0396-0397-tabbed-set_44b85515-ce05-473f-9ce7-d1255a39e163.jpg?v=1784294138"},{"product_id":"bench-plane-blade-chip-breaker-matched-set-with-tab-for-no-4-1-2-5-1-2-6-7","title":"IBC Premium Bench Plane Blade \/ Chip Breaker Matched Set With Tab For No #4 1\/2, #5 1\/2, #6, #7","description":"\u003cp\u003eUpgrade your vintage Stanley or Record bench plane with our precision-engineered IBC replacement blade. Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.095 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468727361822,"sku":"RBMS-0396","price":103.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/RBMS-0394-0395-0396-0397-tabbed-set_b07186b8-a139-4c49-a0dd-154be7087a91.jpg?v=1784294141"},{"product_id":"bench-plane-blade-chip-breaker-matched-set-with-tab-for-no-8","title":"IBC Premium Bench Plane Blade \/ Chip Breaker Matched Set With Tab For No #8","description":"\u003cp\u003eUpgrade your vintage Stanley or Record bench plane with our precision-engineered IBC replacement blade. Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.095 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468728279326,"sku":"RBMS-0397","price":109.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/RBMS-0394-0395-0396-0397-tabbed-set_10a15560-c9b3-47ec-96e6-7e7f6193315d.jpg?v=1784296906"},{"product_id":"block-plane-9-blade-1-5-8-wide-3-slot-1-8-thk","title":"IBC Premium Block Plane #9 ½ blade 1 5\/8\" wide 3 slot 1\/8\" thk","description":"\u003cp\u003eThis blade measures 1 5\/8 inches wide by 1\/8 inch (0.125”) thick and is expertly made from premium A2 tool steel, cryogenically treated and triple tempered to a hardness of 60-62 HRc. This meticulous treatment ensures exceptional wear resistance and superior edge retention. The sides are precision-ground square to the bevel, then hand-polished for ultimate flatness—achieving an impressive tolerance of ±0.001” along the cutting edge. Specifically designed for seamless compatibility with Stanley block planes, this blade transforms your classic tool into a precision woodworking instrument.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468728738078,"sku":"RBBL-0318","price":56.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/0318-0319-0320-0321-2-1.jpg?v=1736210786"},{"product_id":"block-plane-60-blade-1-3-8-wide-3-slot-1-8-thk","title":"IBC Premium Block Plane #60 ½ blade 1 3\/8\" wide 3 slot 1\/8\" thk","description":"\u003cp\u003eThis blade measures 1 3\/8 inches wide by 1\/8 inch (0.125”) thick and is expertly made from premium A2 tool steel, cryogenically treated and triple tempered to a hardness of 60-62 HRc. This meticulous treatment ensures exceptional wear resistance and superior edge retention. The sides are precision-ground square to the bevel, then hand-polished for ultimate flatness—achieving an impressive tolerance of ±0.001” along the cutting edge. Specifically designed for seamless compatibility with Stanley block planes, this blade transforms your classic tool into a precision woodworking instrument.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468728934686,"sku":"RBBL-0319","price":56.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/0318-0319-0320-0321-2-1.jpg?v=1736210786"},{"product_id":"block-plane-9-blade-1-5-8-wide-9-slot-1-8-thk","title":"IBC Premium Block Plane #9 ½ blade 1 5\/8\" wide 9 slot 1\/8\" thk","description":"\u003cp\u003eThis blade measures 1 5\/8 inches wide by 1\/8 inch (0.125”) thick and is expertly made from premium A2 tool steel, cryogenically treated and triple tempered to a hardness of 60-62 HRc. This meticulous treatment ensures exceptional wear resistance and superior edge retention. The sides are precision-ground square to the bevel, then hand-polished for ultimate flatness—achieving an impressive tolerance of ±0.001” along the cutting edge. Specifically designed for seamless compatibility with Stanley block planes, this blade transforms your classic tool into a precision woodworking instrument.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468729131294,"sku":"RBBL-0320","price":56.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/0318-0319-0320-0321-2-1.jpg?v=1736210786"},{"product_id":"block-plane-60-blade-1-3-8-wide-9-slot-1-8-thk","title":"IBC Premium Block Plane #60 ½ blade 1 3\/8\" wide 9 slot 1\/8\" thk","description":"\u003cp\u003eThis blade measures 1 3\/8 inches wide by 1\/8 inch (0.125”) thick and is expertly made from premium A2 tool steel, cryogenically treated and triple tempered to a hardness of 60-62 HRc. This meticulous treatment ensures exceptional wear resistance and superior edge retention. The sides are precision-ground square to the bevel, then hand-polished for ultimate flatness—achieving an impressive tolerance of ±0.001” along the cutting edge. Specifically designed for seamless compatibility with Stanley block planes, this blade transforms your classic tool into a precision woodworking instrument.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468729524510,"sku":"RBBL-0321","price":56.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/0318-0319-0320-0321-2-1.jpg?v=1736210786"},{"product_id":"bench-plane-3-1-3-4-x-0-140-thk","title":"IBC Premium Bench Plane #3, 1 3\/4\" x 0.140\" thk","description":"\u003cp\u003eCrafted from cryogenically treated and triple-tempered high-quality A2 steel, this blade measures 0.140” thick and is hardened to an impressive 60-62 HRc for superior edge retention and durability. The sides are precision-ground square to the bevel and hand-polished, meeting rigorous flatness tolerances of ±0.001” along the cutting edge. Engineered for a precise fit, this blade transforms your hand plane into an exceptional woodworking instrument, delivering unparalleled performance in every stroke.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468730442014,"sku":"RBBE-0334","price":62.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/928696ea-RBBE-0334.jpg?v=1742567049"},{"product_id":"bench-plane-4-5-2-x-0-140-thk","title":"IBC Premium Bench Plane #4, #5 2\" x 0.140\" thk","description":"\u003cp\u003eCrafted from cryogenically treated and triple-tempered high-quality A2 steel, this blade measures 0.140” thick and is hardened to an impressive 60-62 HRc for superior edge retention and durability. The sides are precision-ground square to the bevel and hand-polished, meeting rigorous flatness tolerances of ±0.001” along the cutting edge. Engineered for a precise fit, this blade transforms your hand plane into an exceptional woodworking instrument, delivering unparalleled performance in every stroke.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468731031838,"sku":"RBBE-0336","price":62.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/b7b42bf6-RBBE-0336.jpg?v=1742567030"},{"product_id":"bench-plane-4-5-6-7-2-3-8-x-0-140-thk","title":"IBC Premium Bench Plane #4 ½, #5 ½, #6, #7 2 3\/8\" x 0.140\" thk","description":"\u003cp\u003eCrafted from cryogenically treated and triple-tempered high-quality A2 steel, this blade measures 0.140” thick and is hardened to an impressive 60-62 HRc for superior edge retention and durability. The sides are precision-ground square to the bevel and hand-polished, meeting rigorous flatness tolerances of ±0.001” along the cutting edge. Engineered for a precise fit, this blade transforms your hand plane into an exceptional woodworking instrument, delivering unparalleled performance in every stroke.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468731293982,"sku":"RBBE-0340","price":69.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/444c4796-RBBE-0340.jpg?v=1742567007"},{"product_id":"bench-plane-8-jointer-2-5-8-x-140-thk","title":"IBC Premium Bench Plane #8 Jointer 2 5\/8\" x 0.140\" thk","description":"\u003cp\u003eCrafted from cryogenically treated and triple-tempered high-quality A2 steel, this blade measures 0.140” thick and is hardened to an impressive 60-62 HRc for superior edge retention and durability. The sides are precision-ground square to the bevel and hand-polished, meeting rigorous flatness tolerances of ±0.001” along the cutting edge. Engineered for a precise fit, this blade transforms your hand plane into an exceptional woodworking instrument, delivering unparalleled performance in every stroke.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468731392286,"sku":"RBBE-0341","price":72.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/229648b4-RBBE-0341.jpg?v=1742566971"},{"product_id":"blade-chipbreaker-matched-set-3-5-1-4","title":"IBC Premium Blade Chipbreaker Matched set #3, #5 1\/4","description":"\u003cp\u003eCrafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.140 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e\u003cp\u003eThe chipbreaker is meticulously crafted from a unique high-carbon O-1 steel, this 0.125-inch thick chip breaker is hardened to 30-32 HRc, providing exceptional support to your plane blade and reducing chatter. Its precisely engineered leading edge ensures a tight fit against the blade, optimizing shaving clearance for smoother, more precise cuts.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468731588894,"sku":"RBMS-0384","price":93.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/e484378f-RBMS-0384.jpg?v=1742567299"},{"product_id":"blade-chipbreaker-matched-set-4-5","title":"IBC Premium Blade Chipbreaker Matched set #4, #5","description":"\u003cp\u003eCrafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.140 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e\u003cp\u003eThe chipbreaker is meticulously crafted from a unique high-carbon O-1 steel, this 0.125-inch thick chip breaker is hardened to 30-32 HRc, providing exceptional support to your plane blade and reducing chatter. Its precisely engineered leading edge ensures a tight fit against the blade, optimizing shaving clearance for smoother, more precise cuts.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468735848734,"sku":"RBMS-0385","price":95.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/05e7c960-RBMS-0385.jpg?v=1742567274"},{"product_id":"blade-chipbreaker-matched-set-4-1-2-5-1-2-6-7","title":"IBC Premium Blade Chipbreaker Matched set #4 1\/2, #5 1\/2, #6, #7","description":"\u003cp\u003eCrafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.140 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e\u003cp\u003eThe chipbreaker is meticulously crafted from a unique high-carbon O-1 steel, this 0.125-inch thick chip breaker is hardened to 30-32 HRc, providing exceptional support to your plane blade and reducing chatter. Its precisely engineered leading edge ensures a tight fit against the blade, optimizing shaving clearance for smoother, more precise cuts.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468736504094,"sku":"RBMS-0386","price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/d48add7e-RBMS-0386.jpg?v=1742567257"},{"product_id":"blade-chipbreaker-matched-set-8","title":"IBC Premium Blade Chipbreaker Matched set #8","description":"\u003cp\u003eCrafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.140 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while its sides are precision-ground square to the bevel and hand-polished for optimal performance. Designed to fit seamlessly into your classic plane, this blade elevates your woodworking experience to modern standards.\u003c\/p\u003e\u003cp\u003eThe chipbreaker is meticulously crafted from a unique high-carbon O-1 steel, this 0.125-inch thick chip breaker is hardened to 30-32 HRc, providing exceptional support to your plane blade and reducing chatter. Its precisely engineered leading edge ensures a tight fit against the blade, optimizing shaving clearance for smoother, more precise cuts.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468736635166,"sku":"RBMS-0387","price":102.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/d91c299b-RBMS-0386-1.jpg?v=1742567227"},{"product_id":"chipbreaker-3-5-1-4","title":"IBC Premium Chipbreaker #3, #5 1\/4","description":"\u003cp\u003eMeticulously crafted from a unique high-carbon O-1 steel, this 0.125-inch thick chip breaker is hardened to 30-32 HRc, providing exceptional support to your plane blade and reducing chatter. Its precisely engineered leading edge ensures a tight fit against the blade, optimizing shaving clearance for smoother, more precise cuts. Upgrade your hand plane with this premium chip breaker to achieve superior woodworking results.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468737257758,"sku":"CBBE-0334","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/RBBE-0334_c9103984-fbf3-4921-b08d-da2a12ad03ee.jpg?v=1784294142"},{"product_id":"chipbreaker-4-5","title":"IBC Premium Chipbreaker #4, #5","description":"\u003cp\u003eMeticulously crafted from a unique high-carbon O-1 steel, this 0.125-inch thick chip breaker is hardened to 30-32 HRc, providing exceptional support to your plane blade and reducing chatter. Its precisely engineered leading edge ensures a tight fit against the blade, optimizing shaving clearance for smoother, more precise cuts. Upgrade your hand plane with this premium chip breaker to achieve superior woodworking results.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468737356062,"sku":"CBBE-0336","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/RBBE-0336_7c77b57d-6a35-456a-b93e-a9f4d2ef1fcd.jpg?v=1784294144"},{"product_id":"chipbreaker-4-1-2-5-1-2-6-7","title":"IBC Premium Chipbreaker #4 1\/2, #5 1\/2, #6, #7","description":"\u003cp\u003eMeticulously crafted from a unique high-carbon O-1 steel, this 0.125-inch thick chip breaker is hardened to 30-32 HRc, providing exceptional support to your plane blade and reducing chatter. Its precisely engineered leading edge ensures a tight fit against the blade, optimizing shaving clearance for smoother, more precise cuts. Upgrade your hand plane with this premium chip breaker to achieve superior woodworking results.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468737716510,"sku":"CBBE-0340","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/RBBE-0340_53f33026-ef31-483b-a132-f7d167591ca8.jpg?v=1784294145"},{"product_id":"chipbreaker-8","title":"IBC Premium Chipbreaker #8","description":"\u003cp\u003eMeticulously crafted from a unique high-carbon O-1 steel, this 0.125-inch thick chip breaker is hardened to 30-32 HRc, providing exceptional support to your plane blade and reducing chatter. Its precisely engineered leading edge ensures a tight fit against the blade, optimizing shaving clearance for smoother, more precise cuts. Upgrade your hand plane with this premium chip breaker to achieve superior woodworking results.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Default Title","offer_id":49468739125534,"sku":"CBBE-0341","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/RBBE-0341_ea801466-9b61-4f10-9d40-abf8378fdfdd.jpg?v=1784294148"},{"product_id":"3-8-skew-chisel-lr-set-walnut-handle","title":"3\/8 Inch IBC Premium Skew Chisel Pair (L+R)","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 9.2\" with regular handle; 12.25\" with long (paring) handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 7\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":49468747219230,"sku":"CHSW-0824","price":240.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59695064514846,"sku":"CHSM-0824","price":240.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59695064547614,"sku":"CHBF-0824","price":137.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHSW-0824.jpg?v=1737989276"},{"product_id":"1-2-skew-chisel-lr-set-walnut-handle","title":"1\/2 Inch IBC Premium Skew Chisel Pair (L+R)","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 9.2\" with regular handle; 12.25\" with long (paring) handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 7\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":49468747448606,"sku":"CHSW-0825","price":240.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59695066448158,"sku":"CHSM-0825","price":240.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59695066480926,"sku":"CHBF-0825","price":137.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHSW-0825.jpg?v=1737989243"},{"product_id":"5-8-skew-chisel-lr-set-walnut-handle","title":"5\/8 Inch IBC Premium Skew Chisel Pair (L+R)","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 9.2\" with regular handle; 12.25\" with long (paring) handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 7\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":49468747710750,"sku":"CHSW-0827","price":240.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59695066513694,"sku":"CHSM-0827","price":240.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59695066546462,"sku":"CHBF-0827","price":137.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHSW-0827.jpg?v=1737989308"},{"product_id":"skew-chisel-set-of-3-l-r-walnut-handles","title":"IBC Premium Skew Chisel Set — 3 Pairs (6 Chisels)","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 6\". Total tool length is 9.2\" with regular handle; 12.25\" with long (paring) handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 7\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":49468750692638,"sku":"CSSW-0802","price":720.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59695066579230,"sku":"CSSM-0802","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/skew_chisel_walnut.jpg?v=1737989308"},{"product_id":"1-2-inch-butt-chisel-walnut-handle","title":"1\/2 Inch IBC Premium Butt Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 4.75\". Total tool length is 8.0\" with the regular handle, and 11.125\" with the long handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616217694494,"sku":"CHBW-0835","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616217727262,"sku":"CHBM-0835","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59616217760030,"sku":"CHBF-0835","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHBW-0835.jpg?v=1737989002"},{"product_id":"1-inch-butt-chisel-walnut-handle","title":"1 Inch IBC Premium Butt Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 4.75\". Total tool length is 8.0\" with the regular handle, and 11.125\" with the long handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616217792798,"sku":"CHBW-0837","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616217825566,"sku":"CHBM-0837","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59616217858334,"sku":"CHBF-0837","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHBW-0837.jpg?v=1737988971"},{"product_id":"1-1-2-inch-butt-chisel-walnut-handle","title":"1 1\/2 Inch IBC Premium Butt Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 4.75\". Total tool length is 8.0\" with the regular handle, and 11.125\" with the long handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616217891102,"sku":"CHBW-0838","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616217923870,"sku":"CHBM-0838","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59616217956638,"sku":"CHBF-0838","price":78.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHBW-0838.jpg?v=1737988937"},{"product_id":"2-inch-butt-chisel-walnut-handle","title":"2 Inch IBC Premium Butt Chisel","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 4.75\". Total tool length is 8.0\" with the regular handle, and 11.125\" with the long handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616217989406,"sku":"CHBW-0839","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616218022174,"sku":"CHBM-0839","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59616218054942,"sku":"CHBF-0839","price":89.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHBW-0839.jpg?v=1737989031"},{"product_id":"ibc-butt-chisel-set-walnut-handle","title":"IBC Premium Butt Chisel Set","description":"\u003cp\u003e\u003cstrong\u003eChisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Back sides have a semi-mirror finish. Beveled sides are ground with a small 90° flat for comfort and safety during use. Cutting edges are ground with a primary bevel @ 25°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Blade length is 4.75\". Total tool length is 8.0\" with the regular handle, and 11.125\" with the long handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59616218087710,"sku":"CSBW-0803","price":505.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59616218120478,"sku":"CSBM-0803","price":505.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/butt_chisel_set_walnut.jpg?v=1737989031"},{"product_id":"3-16-inch-mortise-chisel-walnut-handle","title":"3\/16 Inch IBC Premium Mortise Chisel","description":"\u003cp\u003e\u003cstrong\u003eMortise Chisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Sides ARE PARALLEL and SQUARE to the bottom within two and a half tenths of one thousandth of an inch (0.00025\"). Mortise Cutting edge is ground with a primary bevel @ 30°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Finely ground to a semi-mirror finish. Blade length is 6\". Total tool length is 9.2\" with regular handle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 3.87\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59613473145118,"sku":"CHMW-0853","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59613473177886,"sku":"CHMM-0853","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59613473210654,"sku":"CHBF-0853","price":88.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHMW_0853.jpg?v=1737565697"},{"product_id":"1-4-inch-mortise-chisel-walnut-handle","title":"1\/4 Inch IBC Premium Mortise Chisel","description":"\u003cp\u003e\u003cstrong\u003eMortise Chisel Blade:\u003c\/strong\u003e Made from AISI High Vanadium A2 tool steel fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 Rc. Sides ARE PARALLEL and SQUARE to the bottom within two and a half tenths of one thousandth of an inch (0.00025\"). Mortise Cutting edge is ground with a primary bevel @ 30°, square to the two side flats, with a 2° higher micro bevel and ship sharp enough from our factory to cut the hair on your arm. Finely ground to a semi-mirror finish. Blade length is 6\". Total tool length is 9.2\" with regular handle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFerrule:\u003c\/strong\u003e Made from a solid round stress and fatigue resistant steel hardened to 54-56 Rc with a double temper for added strength. Center bored, reamed, and flat on the top and bottom to slip over the tang and seat flush and firm against the flats on the blades two shoulders at one end and the flat top of the wood at the other. This ferrule design and solid construction protects the blade tang, bolsters the wood and provides the chisel with tremendous strength to withstand the lateral stresses and impact from mallet strikes. Hand polished.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandle Steel Core:\u003c\/strong\u003e Made from the same high tensile strength stress and fatigue resistant steel as the ferrule, it easily seals the chisel together permanently or, repeatedly. Hollowed and milled open in its mid section for balance and weight with finely tapped ends that attach the threaded blade tang and striking cap precisely and securely. Handle length is 3.87\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandle Striking Cap:\u003c\/strong\u003e Made from a solid round aluminum bar, it has a precision turned domed top and a finely threaded center post that is precisely and securely attached to the steel core. Its wide flat back seats flush and firm against the matching flat on the back of the wood for a wide area of contact. Tightening the handle compresses the back cap against the wood, fixing both firmly in place. Hand polished on domed surface. Weight: 10 grams.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandle Wood:\u003c\/strong\u003e IBC Chisel handles are currently available with Maple or Walnut wood and at 3 1\/2” or 7” long, Center bored and reamed to fit its steel core and cut flat on top and bottom for a wide area of contact with the hardened ferrule and aluminum back cap. Tightening the chisel compresses the wood between them to seal it in place. When the handle is detached, the wood can also be separated from the steel core and back cap to customize the handle with your own wood species and\/or profile.\u003c\/p\u003e","brand":"IBC Tools","offers":[{"title":"Walnut","offer_id":59613473276190,"sku":"CHMW-0854","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":59613473308958,"sku":"CHMM-0854","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Blade + ferrule only","offer_id":59613473341726,"sku":"CHBF-0854","price":88.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/files\/CHMW_0854.jpg?v=1737565677"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9096\/4510\/collections\/55ebbd57-RBMS-0394-0395-0396-0397Thumb-1.jpg?v=1736118234","url":"https:\/\/ibctools.com\/collections\/all-products.oembed?page=3","provider":"IBC Tools Inc.","version":"1.0","type":"link"}